5m Russian Arm Scorpio Truck Mounted Cinema Camera Crane
Brand : IDEAL
Product origin : China
Delivery time : 15 days
Supply capacity : 5 set/month
Car mount camera crane is a popular type of film equipment in the film industry. It is widely used in film making job especially when shooting moving pictures. Our car mount camera cranes fit all types of vehicles from Mini Cooper to large trucks. Some of our customers even use them on the ship. We have 6 years experience of manufacture. Now this jib crane is a mature product. We sell many types a year and that makes the cost very low. The minimum purchase quantity is 1 set
5m Russian Arm Scorpio Truck Mounted Cinema Camera Crane
2. Crane total length: 5 meters
3. Dutch head: Equipped universal dutch head connector for all types of dutch heads
(Optional:pan, tilt, roll 3 axis head)
4. Arm body:
5 meters:front arm 3.5m rear arm: 1.5m
6 meters : front arm 4m rear arm:2m
telescopic type.
5. Head weight capacity: 70kgs
6. Motor: The head is stabilized with good motors
7. Controllers:
Unique control box with 2 joysticks
Controller for arm telescoping
Controller for pan and tilt of arm. Speed, damping etc.
8. Use 10 inches HD monitor
9. Gross weight: 5m 300kgs 6m 340kgs
Car Mount Camera Crane Parameter Sheet | ||
Standard | High configuration | |
Motor | Joint venture motor | Imported motor |
Arm | Round pipe arm, imported aviation aluminum alloy material, diameter of pipe arm: 110mm | Round pipe arm, imported aviation aluminum alloy material, diameter of pipe arm: 110mm |
Length: 5m/6m | Length: 5m/6m | |
Arm Postion limit | Mechanical control | Electrical control |
Arm connection | Soft connection with wiring | Hard connection with reinforced tubes |
Arm Rotation Speed | 10 times/minute | 10 times/minute |
Gear | Russian reducer, gear, sliding bearing | Russian reducer, gear, sliding bearing |
Control Box | Domestic-made control box with joysticks | imported-made control box with joysticks |
Battery Box | 48V battery box | 48V battery box |
Balance counterweight | yes | yes |
Shock Absorption | Mechanical shock absorption system | Mechanical shock absorption system |
Weight Capacity | 70KGS | 70KGS |
Monitor | 10 inches monitor | 10 inches monitor |
Max Driving speed | 140kmh | 150kmh |
1.The arm body:High strength aluminum alloy
2.Shock absorbing heads （It rotates at 360 degrees, with shock absorption system, speed less than 60 pulses, and can be stably photographed）
Dutch head max loading: 70kgs Control box with two joysticks
Arm max payload: 90kgs
3.Connection with car.
Customer Feedback
FAQ
Q: How long does the installation take? A: 2 Hours
Q: What cameras can I use? A: Customer can attach your own dutch head on the arm of crane, and use the cameras applicable to the your dutch head.
Q: Continuous working time? A: over 8 hours
Q: Max number of turns? A: Vertical 55 degrees and horizontal 1080 degrees
Q: Method of control? A: X by wire
Q: Assist device. A: Equipped.
Q: Does the machine have the overload indicator? A: Yes
Q: What is the max lens height? A: Usually 4 meters. Different with cars.
Q: Water proofing grade: 1st grade.
Q: Dust proofing grade? A: 3rd grade
Q: How to install the crane on car? A: The crane is soldered on the top of car.
Q: What cars can this crane be installed on? A: All type of cars are ok.
Contact
Vivien